0

Wall Safe Installation Guide

Even if you keep most of your assets at the bank, you most likely have collectables, jewelry, or even family heirlooms at home that you want to stay safe. A hidden wall safe is a cost-effective, dependable, and simple way to ensure that intruders do not have access to your valuables.

Many people are hesitant to purchase a wall safe because they don’t want to pay for an expensive contractor to install it; nevertheless, installing a wall safe yourself is relatively simple.

In most cases, a  safe manufacturer designs their built in wall safe varieties on the center studs and within the depth of a typical wall. Safes can be purchased in various depths and widths, though. As a result of the specific installation requirements, these wall safes are typically installed during construction or remodeling.

P.S- Use the instructions below to install a wall safe for home. Check to see if your custom home safe comes with instructions or not. Utilize these in conjunction with these suggestions, as manufacturer instructions may address aspects unique to your safe.

Preparation Needed 

Wall Safe

Source: Depositphotos

Have you ever wondered about how to install a wall safe? To be efficient in offering optimum security, wall safe installation must be done correctly. This means that the space must be measured for proper sizing, the unit must fit properly, and a qualified safe engineer must do the installation.

Keep in mind that these are large commercial safes that will be attached to the framework of your home, unlike the residential hidden wall safes. They’re also utilized for safeguarding extremely precious goods. Experience, care, and precision are all necessary. If you’ve decided to install a safe in-wall, ensure the project is executed to the greatest possible standard.

A wall safe installation must be adequately done on your home to provide the additional security that it delivers. This entails designing and building a space for your home or business unit.

  • You can remove plasterboard and fix your wall safe to the gap made for high security safes.
  • For larger safes, you may need to hire a builder or contractor to modify your home’s brickwork so that you can properly install the safe.
  • You can make a false wall if you don’t want to change your walls in any way. This is typically easier in small alcove spaces, but it can also be done across complete wall spaces.

What You Will Need

Wall Safe

Source: Depositphotos

Depending on your conditions, the tools necessary to install a custom wall safe may vary. You’ll need the following items most of the time:

  1. Pencil
  2. Protective covers for furniture
  3. Safety glasses
  4. Keyhole saw, or jigsaw
  5. Measuring tape, or ruler
  6. Magnetic stud finder
  7. Screws
  8. A carpenter’s level
  9. Your wall is safe, of course! 

Remember to choose the built-in safes for homes. Like a hotel safe deposit box, the house in wall safe must also be highly protected. You can talk to your wall safe manufacturer for the same. For the most part, this entails evaluating the safe’s Underwriters Laboratories (UL) and Intertek (ETL) ratings before purchasing it. 

Installation Steps:

Step 1: Choose the Right Wall

Choose a wall that will support your safe before you buy it. You can also build a fake wall. Choose a wall with no plumbing, wiring, or heating ducts behind it to prevent your safe from being obstructed. Ascertain that there is adequate room to dig a hole around five feet high for easy access. Consider putting the safe behind a wall inside a cabinet or closet if you want to keep it hidden.

You need not be concerned about the room behind your safe if it is intended to fit two walls. Find a spot where the rear of the safe may be hidden, such as a utility room, closet, or garage, if your safe will protrude through the back wall.

Step 2: Determine the Correct Size Safe

Find a safe that fits the space after you’ve chosen a wall. Most safe manufacturers create wall safes of 15 inches wide and fit between conventional studs (set 16 inches apart in an average home). Locate the studs in a wall of your choice, mark their locations, and measure the distance between them to ensure your safe will fit. Keep in mind to place the in-wall safe between the studs. Putting the in-wall safe between studs is crucial to hold it steady.

Step 3: Mark Out Your Space

It’s crucial to secure your safe between existing studs in your wall to keep it hidden. After you’ve measured the studs to make sure your safe will fit, use a carpenter’s level to create a template for the size of your safety on the wall. If the outline isn’t straight and accurate, you can wind up with a hole that matches your chosen safe.

Step 4: Make a Hole Big Enough for Your Safe

You can begin cutting a hole in your wall after carefully measuring and marking your dimensions. To avoid getting dust and particles all over your furniture, use protective clothing. On the off-chance you run into the wire you didn’t know about; you might want to turn off the circuit breaker in the area where you’re working to ensure your safety.

Put a screw in the center of the wall portion you’re cutting before you start sawing – this will allow you to remove the drywall later without it falling in the wall. Run the saw along the lines of the template you drew on the wall, then grab the screw to pull out the drywall piece and throw it away.

Step 5: Fit the Safe into The Wall

Slide the safe into the hole you made in the wall, holding the weight in place with your hands as you do so. If the space around the safe is too large, you may need to apply shims to make it fit better.

Drill holes in the wall studs from within the safe and use screws to fix the safe to the studs. This prevents robbers from just pulling your safe from the wall and taking it with them.

After you’ve bolted the safe in place, all you have to do now is put your valuables inside and lock the door. Similar procedure would be followed within in ground safes

Conclusion:

So now you know how to put a home safely together, but if you’re still undecided about which safe you should choose for your home, Safewell’s biometric or a finger print safe is built for quick access to your belongings. As a result, losing your security key or combination code is no longer an issue because everything you need is within reach!

Safewell is also well-known for its hotel safe deposit box manufacturing. Their fingerprint safes are equipped with high-quality biometric readers, allowing you to gain access to your belongings in a moment. We provide a choice of biometric safes with fingerprint locks that pass quality control, whether you need to keep cash, valuables, or firearms. Want to know more before buying the best wall safe or wall mounted safe, or maybe a home wall safe? Then contact us right away!

Table of Contents

Get Free Sample


    Upload Your Artwork

    *Please upload only jpg, png, pdf, dxf, dwg files. Size limit is 10MB

    Wonderful! Share this Case:

    Share on facebook
    Share on twitter
    Share on linkedin
    Share on pinterest

    Comments are closed.

    Related Posts

    图片13

    Best Fire and Burglary Safe to Protect Celebrities’ Property

    In a recent incident that shocked the public, famous actress Liu Yuxin’s Los Angeles …

    30

    How Safe Are Safety Deposit Boxes Really?

    Introduction In a world where safeguarding our most cherished possessions is paramount, the role …

    30

    Finding the Best Drop Safe for Restaurants: A Comprehensive Guide

    Introduction In today’s bustling restaurant industry, ensuring the safety of your hard-earned cash has …

    Contact Us

    Send your inquiry today, and our dedicated support team will get back to you as soon as possible to address your concerns.


      Upload Your Artwork

      *Please upload only jpg, png, pdf, dxf, dwg files. Size limit is 10MB

      Get Free Samples


        *Please upload only jpg, png, pdf, dxf, dwg files. Size limit is 10MB

        *We respect your confidentiality and all information are protected.