You want to preserve your land titles, company contracts, cheque books, and other essential papers secure from fire, which is one of the major reasons you acquire a fireproof safe. Obviously, you’ll want a safe that’s easy to get to. The only issue is that what if you drop or lose your key?
If you lose your password, many fingerprint safes feature a key that permits you to physically access them. But what if you forget your passwords and the key to your safe is lost? You’ve come to the correct location if this describes your present circumstance. There’s no need to be concerned; this is a pretty frequent problem, and you have various options for getting your home safe unlocked. Let’s get to it!
1. Use a Paperclip
Locks can be picked with just a paper clip, as you’ve probably seen in a lot of movies. If the lock isn’t on the front, the safe may have a manual bypass keyhole on the rear. This is particularly relevant if your safe is mostly digital. You can use a paperclip to remember your password if you don’t have your manual bypass keys.
To unlock your safe using a paperclip, flatten it and insert it through the keyhole. To anchor and spin the lock, use an additional paper clip or a little screwdriver below the first one. Carefully pick and locate the latching mechanism with the first paper clip. Burglary safes are not easy to crack open.
You’re aiming for a clicking sound that signals that you’ve succeeded. After that, you ought to be able to unlock the safe by turning the lock. While this is a viable approach, it does need a significant amount of duration and patience.
2. Use a Nail File
A nail file may be used to pick the lock of your safe in the same way that a paper clip can. In this situation, the sharp tip of your nail file should be inserted into the keyhole. Squirm the file circling in the keyhole, pushing the pins until you hear the ‘click’ sound.
Rotate the file clockwise to flip the lock and unlock your safe after you detect the clicking sounds. This approach, like the paper clip technique, will take considerable duration and patience to complete.
3. Use a Rare Earth Magnet
A solenoid is found in most electrical safes, notably those meant to store guns. A solenoid is a substance that regulates the latching mechanism of a safe. A powerful rare earth magnet, such as a Neodymium magnet, can be used to reset this substance. These sorts of magnets may usually be found at a hardware shop or on the internet.
Rare earth magnets are extremely strong and ought to be handled with caution. If you have a pacemaker, you must never carry it near electrical gadgets or kitchenware, and you must not handle one if you have one. Also, resist inserting your finger between the magnet and the safe, since this will almost certainly result in injury.
Insert the rare earth magnet inside a sock and secure it to the safe’s upper left corner to unlock it. Gradually make your way to the right side of the safe till you find the solenoid. This approach requires patience, but the safe will open once the magnet makes contact with the solenoid. When you’ve forgotten your safe’s combo, using a rare earth magnet is a fairly surefire solution.
4. Try Bouncing or Slamming Your Safe
Although this may seem weird, numerous safe owners claim that slamming the safe from a respectable distance may override the lock and unlock it. If you’ve forgotten your safe’s combo and lost the key, use this hack. Take the following steps:
- To begin, cover the surface you plan to slam the safe on with a towel.
- With your left hand on the rear and your dominant wrist on the front, hold the safe about two feet away from the ground. The purpose of this posture is for it to drop and open the door.
- Slam the safe a few times to get the door to open.
- Avoid dumping the safe from a great height since it may be permanently damaged or insecure.
If dumping the safe doesn’t work, try smashing the solenoid with a hammer safely above it to release the door. If nothing of the above approaches work, try some of the others listed above or any other.
5. Drill a Hole Into the Safe
Drilling should only be used when there are no other options. Before you contemplate drilling. When you’ve forgotten the combo to the safe or misplaced the key, drilling may be an alternative. All you have to do to open the safe using drilling is make a small hole in a location where you can see the lock within. After you’ve completed the drilling, you may use your finger to open the safe’s latch. Drilling has numerous drawbacks, including the potential to destroy the safe, which is one of the drawbacks. You should think again before taking this move.
6. Trying to Pry it Open
Because these safes aren’t completely impermeable, there should be enough room to break open the locking mechanism and insert a strong rod. Unfortunately, once you’ve forced it free, the locking mechanism will be damaged, and the safe will no longer be used for its intended function.
You may also try continuously pounding the locking mechanism to unlock the safe. The anchor keeping the latching bar in place may weaken and disengage as a result of this. This, like the previous way, has the potential to permanently harm your stack-on safe.
8. Make an Appointment with a Safe Locksmith
Getting in touch with a qualified locksmith is probably the most effective technique to unlock a safe without a key. If you have attempted and failed to unlock a safe without a key, kindly contact a professional locksmith specialist. You may profit from the technical skills of experienced locksmith specialists since they are adaptable in managing various types and models of locked safes.
The procedures indicated above, such as picking and bouncing, will not be used by a professional locksmith. A professional locksmith will utilize a far more successful alternative to open the safe if they have years of knowledge and the proper advanced instruments. A locksmith is more inclined to utilize a technique that you have never seen before. A new safe alternative that fits your lock safe may be delivered by the locksmith, and in certain situations, a new key may be produced by an accurate key-cutting service. If your lock and key are antiquated and prone to breaking, a new key for your safe might be the best alternative.
Safes, like any other device, are prone to malfunctioning, from a fault either at your end or that of the manufacturer. That is why you need to make sure you get yours from the best safes and vaults company in the industry. They have a variety you can choose from and anytime you encounter difficulties you can simply reach out to us. We are also renowned to be able to offer safe solutions for different aspects of your life such as business, that are fireproof and watertight so that your valuables are always secured.